Equipment
Geothermal
-
GeoLoop Grouter
-
450 ft Tremie line to properly grout vertical bore holes
-
Trailer-mounted with water tank, sand hopper, mixing tank, and pump
-
Super Looper
-
Hydraulic driving wheel used to insert U-bend into bore hole
-
Terex Telehandler
-
Used to move materials and equipment around the job site
Drill Rigs
-
2009 CME 55 Low Clearance Drill
-
Track-mounted with rubber tracks
-
Conventional and hollow stem augers to 200 ft, up to 16 in. hole size
-
Core and rotary drilling to 2000 ft (9800 ft-lb. torque)
-
Automatic SPT hammer, Moyno 3L8, hydraulic chuck
-
2008 Versa Drill 2000 NG
-
500 ft of onboard drill steel, capable of drilling to 5000 ft BGS
-
All-wheel-drive carrier, excellent geothermal drill for commercial projects
-
2007 CME 75 Drill
-
Conventional and hollow stem augers to 200 ft, up to 16 in. hole size
-
Core and rotary drilling to 2500 ft (15,000 ft-lb. torque)
-
Automatic SPT hammer, Moyno 3L8, hydraulic chuck
-
2003 CME 85 Drill
-
Conventional and hollow stem augers to 300 ft, up to 16 in. hole size
-
Core and rotary drilling to 2500 ft (20,000 ft-lb. torque)
-
Automatic SPT hammer, Moyno 3L10, hydraulic chuck
-
1993 BK-81 (High Torque Rotary Drive)
-
Conventional and hollow stem augers to depths of 450 ft (20,000 ft-lb. torque)
-
Core and rotary drilling to 2500 ft with a 15 ft hydraulic chuck
-
1993 Gus Pech Mite-E-Mite Drill (Self Propelled Low Profile Carrier)
-
Conventional and hollow stem augers to depths of 350 ft
-
Propane powered for inside building usage
-
Capable of drilling at 13 ft minimum headroom
-
1990 CME 75 Drill (High Torque Rotary Drive)
-
Conventional and hollow stem augers to depths of 350 ft
-
Core and rotary drilling to 1650 ft
-
Automatic SPT hammer, Moyno 3L8
-
Two - 850 CME ATVs
-
Conventional and hollow stem augers to 300 ft
-
Automatic SPT hammer, Moyno 3L8, hydraulic chuck
-
6610 DT Geoprobe on Rubber Tracks
-
Geoprobe sampling
-
Auger capable
-
Ingersoll Rand T4W
-
Down hole hammer and rotary drilling to 2500 ft
-
Large diameter recovery wells
-
Great for geothermal well projects
-
Six - Ingersoll Rand T4BH Truck Machines
-
Primarily used in quarry drilling operations
-
Down hole hammer and rotary drilling to 2500 ft
-
Two - SK5 ADs
-
Primarily used in quarry drilling operations
-
Down hole hammer and rotary drilling to 1500 ft
-
Down hole hammer capable of 5 in. diameter holes
-
Two - Atlas Copco F-7s
-
Primarily used in quarry drilling operations
-
Track-mounted capable of 3.5 in. to 5 in. diameter holes
-
Atlas Copco DM-30
-
Primarily used in quarry drilling operations
-
Track-mounted, capable of 5 in. to 6.75 in. diameter holes
Additional Rigs Available
